Productdetails

Bendpak RBJ6000 6,000Lb/Rolling Bridge Jack

Bendpak RBJ6000 6,000Lb/Rolling Bridge Jack

SKU:
5175987

$ 1,615.00 

Call For Financing Options

Full Description Specs   Full Description  Lift 6,000 lbs. for Full Wheel Service Capability An individual jack is over-engineered and capable of holding the weight of an entire vehicle, so the two jacks you use to hoist your car are incredibly safe and may even have an overall lift capacity that’s over twice the weight of the vehicle itself. We do this so there’s never any question as to whether or not our four-post bridge jacks are safe. However, it is still important that you never overload a single jack unit past its listed lift capacity. Rubber contact pads Durable rubber contact pads come standard with every rolling bridge jack. These pads adjust to engage the frame of your vehicle directly at the manufacturer-recommended lift point. Frame cradle pads, sold separately, are a necessary accessory for many wide-bodied frames (e.g., trucks, SUVs). Stackable adapters Some undercarriages require longer-reach adapters, so we manufacture stackable adapters to maximize the arm reach on our four-post rolling bridge jacks. They accommodate virtually every vehicle on the market, so it’s just a matter of knowing the weight of your vehicle and selecting a jack(s) with an appropriate lift capacity. High-pressure hydraulic power unit Welded to the side of each four-post rolling bridge jack, you’ll find a high-pressure commercial-grade air-hydraulic pump that requires 125 psi and 10-20 CFM. It’s activated when you press a convenient foot pedal attached to the unit. In seconds flat your vehicle will be lifted to the desired height. Three lock levels Each four-post rolling bridge jack can be raised to three different heights, so whatever your needs are, you can fine-tune the height of your jack to meet them. The locks engage automatically as the jack scissor arms raise, and they release simultaneously when as the arms are lowered. Features & Specs 6,000-lb. lifting capacity Rubber contact pads Stackable adapters High-pressure hydraulic power unit Optional air-line kit     Specs Capacity Lifting Capacity* 6,000 lbs. (2,722 kg) Rise A - Max. Height + Pad Only: 16.5" (419 mm) B - Max. Height + Pad + Adapter: 20" (508 mm) C - Min. Height + Pad Only: 6.5" (165 mm) D - Min. Height + Pad + Adapter: 10" (254 mm) Time to Full Rise: 45 seconds Reach F - Support Arm Width: 35" (889 mm) - 45.5" (1,156 mm) G - Max. Arm Reach: 56" (1,422 mm) H - Min. Arm Reach: 42" (1,067 mm) Power Unit Motor: Air-Hydraulic Pump Noise: 45 dB Shipping Weight: 305 Dimensions: 36" x 22" x 21" / 914 mm x 559 mm x 533 mm  

Questions About the

Bendpak RBJ6000 6,000Lb/Rolling Bridge Jack
Talk to Our Equipment Expert