Bendpak RBJ9000 9,000Lb. Rolling Bridge Jack

SKU/Product #:

$ 2,260.00 

Full Description Specs   Full Description  Lift 9,000 lbs. for Full Wheel Service Capability With a 14,000-lb. capacity lift, you might think the RBJ7000 rolling bridge jack is sufficient for your vehicle. However, vehicles that max out a lift's capacity might have offset centers of gravity. In such cases, the RBJ7000 is not suitable to lift those vehicles. That’s why we offer the RBJ9000. A heavier-duty bridge jack can save you from having to swap your perfectly fine four-post lift for a heavier-duty model. Rubber contact pads Rubber contact pads are essential lifting components. They increase rise and firmly engage your vehicle’s undercarriage lift points. The durable yet non-marring surface ensures vehicles are not scraped or damaged during rolling bridge jack or car lift operation. Stackable adapters The ability to stack and unstack BendPak contact pads increases the versatility of your rolling bridge jack. These adapters are also useful for lifting vehicles that may have drastically different front-and-rear suspensions. With two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift. High-pressure hydraulic power unit BendPak’s rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack. The car lift runs off its own power unit, so there’s no “sharing” of hydraulic power between the two. An airline must be attached to the rolling bridge jack with 125 psi and 10 – 20 CFM. Easy foot pedal control is included for your safety and convenience. Three lock levels With three lock positions, your rolling bridge jack can be raised to the level most comfortable for you. Find the perfect height for the perfect job as you also adjust the height of your car lift. Features & Specs 9,000-lb. lifting capacity Rubber contact pads Stackable adapters High-pressure hydraulic power unit Optional air-line kit     Specs Capacity Lifting Capacity* 9,000 lbs. (4,082 kg) Rise A - Max. Height + Pad Only: 14.5" (368 mm) B - Max. Height + Pad + Adapter: 18" (457 mm) C - Min. Height + Pad Only: 4.5" (114 mm) D - Min. Height + Pad + Adapter: 8" (203 mm) Time to Full Rise: 45 seconds Reach F - Support Arm Width: 41" (1,041 mm) - 51.5" (1,308 mm) G - Max. Arm Reach: 56" (1,422 mm) H - Min. Arm Reach: 42" (1,067 mm) Power Unit Motor: Air-Hydraulic Pump Noise: 45 dB Shipping Weight: 360 Dimensions: 36" x 22" x 21" / 914 mm x 559 mm x 533 mm  

For Questions

Bendpak RBJ9000 9,000Lb. Rolling Bridge Jack
Talk to Our Equipment Experts