Challenger EV1520 15,000lb Inground Lift

SKU/Product #:
EV1520

$ 14,386.90 

$ 0.00 

Full Description Specs   Full Description                                                                                                                                   The EV1520 heavy duty inground lifts are equipped with standard, medium and high extension stack adapters to accommodate a wide variety of Heavy-Duty vehicle lift points. Our Heavy-Duty Inground Lifts are fully contained in a recycled polymer housing to protect your investment and the environment. Challenger’s electric hydraulic cassette style inground EnviroLift® meets the rigorous demands of professional service facilities. With over 50% more bearing contact surface than competitor’s lifts, enhanced wipers both top and bottom and larger 8-1/2” chrome pistons, your shop will have a superior, more stable and repeatable lift resulting in increased productivity. These inground lifts also eliminate environmental concerns with a fully contained polymer housing made from recycled plastic. EnviroLifts require less shop space than surface mounted lifts. With a smaller footprint, your shop will maximize the number of service bays, resulting in higher parts and service revenue. EnviroLift® also creates a professional showroom style appearance with its open, aesthetically pleasing look.    2-Stage Arms The heavy-Duty 2-stage drive-over front and rear swing arms and standard combination stack screw pads accommodate a wide range of heavier vehicle lift points.   Other standard features include a mechanical locking ladder that engages every 3” and a stainless steel air lock release cylinder to prevent rust associated with condensation. Available in 10,000, 12,000 and the exclusive 15,000 lb. lift capacity. The traditional EV1520 inground lifts come standard with Part# 10315 Stack Adapter Extension Kit, #10318 Four Frame Engaging Truck Adapters and #10317 Four Reducer Bushings for use with 10318. Frame engaging adapters (Part #10314 or 10318) are REQUIRED when lifting vehicles with frame construction. Standard Accessories    Stack Adapter Extension Kit P/N 10315 Stack Adapter Kit for 10,000 and 12,000 lb. two post and inground car and truck lifts. Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack Adapter Extension Kit includes four 3" Stack Extensions, two 6" Stack Extensions & two Organizer Racks with hardware. Organizer racks mount to automotive lift column to keep adapters within reach. Works with all Challenger two post automotive lifts.    Four Frame Engaging Truck Adapters P/N 10318 Set of 4 frame engaging truck adapters for 10,000, 12,000, 15,000 and 18,000 two post automotive lifts. Frame engaging adapters are ideal for lifting vehicles such as pickup trucks with frames. They provide direct contact to frames without the slipping associated when lifting on slippery, sprayed undercoatings with traditional rubber pads. Cradle provides secure fit to frame in tight spaces. Works with all Challenger above ground two post lifts. 15,000 & 18,000 two post automotive lifts require reducer busing kit part #10317.    Four Reducer Bushings P/N 10317 Set of 4 to use with p/n 10318 Four Frame Engaging Truck Adapters. Features Larger 8 1/2” diameter chrome pistons provides greater stability under load Chrome non-breathing ram style cylinder(EV1020 only) minimizes water intake and other contamination Enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings Over 50% longer bearing contact than competitor lifts provides increased stability Mechanical lock engages every 3˝ provides safety and allows technician to work at their ergonomic height to increase productivity and minimize fatigue Stainless Steel air lock release cylinder promotes longer working life with its corrosion resistant design Fully contained and sealed recycled polymer cassette tub eliminates risk of hydraulic fluid seeping into the ground Double telescoping screw adjusts from 3-7/8” to 6” with removable rubber pad for frame contact (EV1020 only) Wide drive-thru at 87” accommodates wider vehicles, minimizes tire pinching and provides easy drive-on (EV1020 and EV1220 only)     Specs Inground Lifts Capacity: 15,000 lbs. Stroke: 68"  Rise Height: 84-3/4" Width Overall: 71-1/2" Drive-Thru Clearance: N/A Reach (Arm Minimum) 26-1/4" Reach (Arm Maximum) 43" Adj. Adapter Height: 6-1/2-8-1/4" Adj. Adapter Height: 10-1/2"-12-3/4" Adj. Adapter Height: 14-1/2"-16-3/4" Capacity (Per Arm) 3750 lbs. Guide Plunge Diameter: 8-1/2" Motor: 2HP Voltage (Single Phase Std.) 208v-230v Speed of Rise: 60 seconds Air Required: 75-125 psi Ceiling Height Required: 85" Shipping Weight: 3100 lbs. //

For Questions

Challenger EV1520 15,000lb Inground Lift
Talk to Our Equipment Experts