Productdetails

Rotary Revolution 10,000 lb 2-Post Lift

Rotary Revolution 10,000 lb 2-Post Lift

SKU:
RTP10

$ 3,297.00 

$ 0.00 

Call For Financing Options

Full Description Specs   Full Description                                                                                                                                                The Revolution Lift RTP10 is a commercial grade 10,000 lbs. capacity 2 post lift. The RTP10 allows a customer to lift a vehicle either symmetrically or asymmetrically. It comes with a free set of adapter extensions (mounting hardware optional).”   Features: Overhead padded switch bar to avoid vehicle damage from being raised too high 3-Stage front arm design enables you to position vehicle doors in front of or behind columns to avoid door damage Top mounted pull design hydraulic cylinder. The piston rod is protected behind the carriage to prevent damage Overhead cable equalization Spring operated arm restraints, disengage at floor level Single point lock release Two full-stroke cylinders with overhead cable for equalization ALI Certified   Specs Capacity 10,000 lbs. Rise 76-1/8" w-5" Extension Overall Height 143" Overall Width 131" (can be set-up @ 137" for no additional charge) Drive Through Clearance 99" (105" when using 137" Width Setting) Overhead Switch Height 137-1/4" Front Arm Reach (Min/Max) 24-1/2" / 44-3/8" Rear Arm Reach (Min/Max) 36" / 58" Min. Adapter Height 3-5/8" / 8-5/8" w-5" Extension Width Inside Columns 109" (115" when using 137" Width Setting) Voltage/Amps 208/230, 15 Amps Motor 2 HP / Single Phase Min. Ceiling Height 144" Lift comes with Hilti 3/4" Concrete Anchors and Shim Pack. This lift requires a minimum of 4 1/4" of 3,000 PSI concrete for installation. Shipping Weight is approx. 1650lbs //

Questions About the

Rotary Revolution 10,000 lb 2-Post Lift
Talk to Our Equipment Expert